How India can reduce thermal power emissions

How India can reduce thermal power emissions
x
Highlights

New Delhi: India is the largest emitter of SO2 in the world. Thermal power plants account for 45 per cent of total industrial emissions of SO2 in the...

New Delhi: India is the largest emitter of SO2 in the world. Thermal power plants account for 45 per cent of total industrial emissions of SO2 in the country. FGD (flue gas desulphurization) systems in thermal power plants can reduce SO2 emissions from them by 80 per cent.

FGD gypsum, the by-product in the FGD process, can help India meet some of the shortfall in its output of gypsum.

A study by Centre of Science and Environment (CSE) recommends setting up guidelines on handling, storage, transportation, quality control etc of limestone and gypsum. It also offers suggestions on use of FGD gypsum in sectors such as cement production and high end gypsum products like wall boards and plaster boards.

To meet India’s new emission norms by 2022, a large number of coal-based thermal power plants have to install FGD systems. Limestone is a key raw material in most FGD systems for controlling sulphur dioxide (SO2) emissions. Flue gas desulphurization – limestone availability and gypsum use, as the CSE report is titled, attempts to examine the issue of availability of limestone for FGD.

Said Sunita Narain, director general, CSE: “Many thermal power companies have been raising various concerns regarding FGD installation; one of these is about the availability of limestone, and the use or disposal of FGD gypsum, a by-product of the FGD operation. This report attempts to address both these key issues.”

Say CSE researchers behind the report: “The coal-based power sector would require only seven to 10 million tonnes of limestone annually for operating FGD systems. This is less than 3 per cent of India’s present limestone consumption. For use in FGD, high-quality limestone (CaCO3 > 90 per cent) with minimal impurities is desirable. Industry experts believe that producing additional high-quality limestone would not be a challenge given our large reserves. Moreover, regional distribution of limestone reserves shows that access will not be a problem as a majority of power plants are located within 200 km of a limestone mine.”

Gypsum is a scarce resource in India. The quality of FGD gypsum is at par or even better than mineral gypsum and it has become a substitute for mineral gypsum across the world. CSE estimates that by adopting FGD, India’s power plants would produce around 12-17 million tonnes of gypsum which can easily meet the domestic shortfall and reduce the import burden. The cost of limestone, says CSE, will not be significant as it can be offset by selling FGD gypsum.

While the use of FGD gypsum in the cement industry should be encouraged, it is also necessary to provide incentives to the manufacturers of high-end gypsum products like wall boards and plasterboards. The agriculture sector can also become a valuable consumer of FGD gypsum. In the long term, power plants should be directed to use all the FGD gypsum that is produced; however, the short-term disposal guidelines can be issued. Said Narain: “India is the largest emitter of SO2 in the world, contributing more than 15 per cent of global anthropogenic emissions. FGD systems in thermal power plants can reduce SO2 emissions from them by 80 per cent, points out this CSE report.”

Show Full Article
Print Article
Next Story
More Stories
ADVERTISEMENT
ADVERTISEMENTS